Website uses cookies in ways described in the cookie policy (read). While using this website without changing browser settings, you agree to use cookies, and know that some data will be stored on your browsing device. Mind that that you can always change these settings. Close
unia europejska

simex - pomiar i sterowanie

BCD / RS-485

The transmission of analogue signals may involve the inclusion of some errors when measurements are transmitted to other appliances, for example. For this reason, we have supplemented our range with equipment using digital transmission formats. This method enables the connection of large-size meters that can display identical values as those fitted to a control unit. The software developed for these RS-type meters enables their use as general-purpose meters for any digital quantities (including mnemonic messages). Such meters, when combined into complex networks using the ModBus system, can display information transmitted from the master PC of the PLC controller.

name
General descrption
parameters
  • SWE-73-S
    Low-cost meter in a small case, intended for displaying the measurement data and characters defined by user, sent from the master device over the RS-485 link.
    more
    Power supply 110V AC ± 10%, 230V AC ± 10% or 24V DC (10V ÷ 30V DC), non separated from measurement input
    Power consumption for 110V AC and 230V AC: max. 1,5 VA; for 24V DC: max. 1 W
    Display LED, red, 4 x 13 mm high
    Communication interface RS-485 (Modbus RTU - MASTER / SLAVE), not galvanically isolated
  • SWS-73
    Indicator in small case, intended for displaying the measurement data and characters defined by user, sent from the master device over the RS-485 link.
    more
    Power supply 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC
    Power consumption for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 4,5 VA; 19V ÷ 50V DC power supply: max. 4,5 W
    Display LED, two-coloured (red-green), 4 x 13 mm (IP 40) - standard or LED, red, 6 x 9 mm (IP 65) - option + 3 LED diodes (red), with 8-step adjustment of brighness
    Communication interface RS-485 (Modbus RTU - SLAVE), not galvanically isolated
  • SWE-94-S
    The SWE-94-S is a simple digital panel indicator intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device over the...
    more
    Power consumption for 110V AC and 230V AC: max. 1,5 VA; for 24V DC: max. 1 W
    Display LED, red, 4 x 20 mm high, brightness adjustable in 8 steps
    110V AC ± 10% separated, 230V AC ± 10% separated or 24V DC (10V ÷ 30V DC) not separated
    Communication interface RS-485, 8N1 and 8N2, 1200 bit/s ÷ 115200 bit/s, Modbus RTU (not galvanically isolated)
  • SWS-94
    Indicator with a large, readable display, intended for displaying the measurement data and characters defined by user, sent from the master device over the RS-485 link.
    more
    Power supply 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC
    Power consumption for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 4,5 VA; 19V ÷ 50V DC power supply: max. 4,5 W
    Display LED, red, 4 x 20 mm (standard) or 6 x 13 mm (option) high + 3 LED diodes (red), with 8-step adjustment of brighness
    Communication interface RS-485 (Modbus RTU), not galvanically isolated
  • SWS-N118
    Wall-mounted IP 67 indicator, with large, readable display, intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master device...
    more
    Power supply 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC, all separated
    Power consumption for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 5 VA; 19V ÷ 50V DC power supply: max. 5 W
    Display LED, 4 x 20 mm (standard) or 6 x 13 mm (option) high, red, brightness adjustable in 8 steps
    Communication interface RS-485 (Modbus RTU), not galvanically isolated
  • SW-BCD-94
    Universal indicator with a large, readable display, with serial and parallel input, used as the indicator output for PLCs to display data in the binary, bcd or byte format or to show...
    more
    Inputs parallel: 4 strobe inputs; 16 data inputs (4 decades, 4 bits/decade)
    Outputs 24V DC + 5%, - 10% / max 100 mA, stabilized
    Power supply 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC
    Power consumption for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 4,5 VA; 19V ÷ 50V DC power supply: max. 4,5 W
  • SWS-457
    Indicator in wall-mounted case IP 67, with large, readable 57-mm LED display (ultra bright red, green and blue as well as multicolour LED's), intended for displaying any numerical...
    more
    Power supply 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC
    Power consumption for 19V ÷ 50V DC: max. 13,5 W; for 16V ÷ 35V AC: max. 19,5 VA; for 85 ÷ 260V AC/DC: max. 21 VA
    Display LED, 4 x 57 mm, ultra bright (red, green, blue) or multicolour with 9-step adjustment of colours and 8-step adjustment of brighness (according to order)
    Communication interface RS-485 (Modbus RTU), not galvanically isolated
  • SWS-W606
    Large-size simple digital panel indicator (digits height: 57 mm), intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master...
    more
    Power supply 12V ÷ 30V DC
    Power consumption max. 5 W
    Display LED, red, 6 x 57 mm, display brightness adjustable in 8 steps
    Communication interface RS-485 (Modbus RTU), not galvanically isolated
  • SWS-W510
    Large-size simple digital panel indicator (digits height: 100 mm), intended for displaying any numerical values and characters defined by user (in SLAVE mode only) sent from the master...
    more
    Power supply 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC
    Power consumption for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 11 VA; for 19V ÷ 50V DC power supply: max. 8 W
    Display LED, red, 5 x 100 mm, with 8-step adjustment of brighness
    Communication interface RS-485 (Modbus RTU), not galvanically isolated
  • MultiCon CMC-N16
    As a result of extending the range of functional applications of the MultiCon product line, the CMC-N16 wall mounted model has been designed. The new IP 65 enclosure allows using the...
    more
    Inputs 2 or 4 universal, isolated: 0/4 ÷ 20 mA (also totalizer mode); 0/1 ÷ 5V, 0/2 ÷ 10V; thermocouples: J, K, S, T, N, R, B, E (PN-EN), L (GOST); -10 ÷ 25 mV, -10 ÷ 100 mV, 0 ÷ 600 mV; RTD (2/3 wire): Pt100, Pt500, Pt1000 (PN-EN), Pt'50, Pt'100, Pt'500 (GOST), Ni100, Ni500, Ni1000 (PN-EN), Cu50, Cu100 (PN-83M-53852), Cu'50, Cu'100 (PN-83M-53852); resistance 0 ÷ 300 Ω, resistance 0 ÷ 3 kΩ; 2 universal pulse counter / ratemeter, (max. freq. 5 kHz); 5 digital inputs 24V DC (1 input available in standard, integrated with PS32 or PS42 power supply module)
    Outputs 2 or 4: analogue 4 ÷ 20 mA (passive, isolated, resolution 14 bit); SPST relay 1A/250V; SSR passive (OC with PWM); mixed outputs (2 x REL / 2 x 4 ÷ 20 mA, 2 x REL / 2 x SSR passive, 2 x 4 ÷ 20 mA / 2 x SSR); sensor supply: 24 V DC ± 5% (200 mA max. for current inputs)
    Power supply 19-50V DC, 16-35V AC or 85-260V AC/DC
    Power consumption typical 15 VA, max. 20 VA
  • MultiCon CMC-99
    The MultiCon CMC-99 is a powerful and versatile compact-multichannel-controller with a capability to record data, if the recording function is requested and activated. Thanks to that it...
    more
    Inputs 9 universal inputs max.; 48 analogue inputs (0/4-20 mA or 0/1-5V or 0/2-10V) max.; 48 digital inputs max.; 24 thermocouple inputs max.; 12 RTD inputs max.; 12 counter/ flowmeter/ ratemeter inputs max.; 1 digital input 24V DC (available in standard, integrated with PS3 or PS4 power supply module)
    Outputs 8 analog (4-20 mA) max.; 16 relay (1A/250V) max.; 4 relay 5A/250V max. or 48 SSR outputs, sensor supply: 24 V DC ± 5% (200 mA max. for current inputs)
    Power supply 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC
    Power consumption typical 15 VA; max. 20 VA
  • MultiCon CMC-141
    The Multicon CMC are powerful and versatile compact-multichannel-controllers with a capability to record data, if the recording function is requested and activated. MultiCon CMC‑141 is...
    more
    Inputs up to 15 universal inputs; 72 analogue inputs (0/4-20 mA or 0/1-5V or 0/2-10V) max.; 72 digital inputs max.; 36 thermocouple inputs max.; 18 RTD inputs max.; 12 counter/ flowmeter/ ratemeter inputs max.; 1 digital input 24V DC (available in standard, integrated with  PS3 or PS4 power supply module)
    Outputs 24 analog (4-20 mA) or 36 relay (1A/250V) / 72 SSR outputs or 18 relay 5A/250V max., sensor supply: 24 V DC ± 5% (200 mA max. for current inputs)
    Power supply 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC
    Power consumption typical 25 VA; max. 35 VA

SIMEX Sp. z o.o.

ul. Wielopole 11

80-556 Gdańsk

Poland

tel. (+48 58) 76-20-777

fax (+48 58) 76-20-770

inquiry@simex.pl